ElantraClub

Home | Photos | Customizing | DIY | Portal | Forum | Showcase | COTM | EC Affliate Mall
DIY Project 34

Clock Color Change DIY
by hickie13    (difficulty: easy)

dcao0067a.jpg

A simple mod to change the color of that nasty
green color that matches nothing!
 
 
1- Follow the club's easy dash removal DIY. Only four phillips screws and
some gentle pulling are needed to remove.

2- I was able to swing the dash over to the passenger seat without
removing lighter plug wires, and thus exposing the back to remove the
clock.

dcao0064a.jpg

3- Two phillips screws hold the clock to the back of the dash plate.
Remove clock.
 
4- I went to a local craft store and wandered aimlessly until I found
this great stencil film in a light blue. I wanted to match my Alpine
head unit so I chose that. They had a few other colors too. I have read of
people using hair gel, cleaning supply bottles... any good plastic will do.
This is the only creative part.

dcao0059a.jpg

5- The OE green plastic part is heat melted in four little spots. Use
an exacto knife to cut free. Pop it out and cut your new plastic to
size. I had to use four layers of my stencil film  to get my desired
darkness. You could either use a soldiering iron to melt the new
plastic in place, or just a little Elmers glue like me.

dcao0057a.jpg

6- Reattach clock, put dash back on and enjoy the lack of the 90's
green clock!

dcao0094a.jpg
No more tacky green clock... yea!