What you'll need: 

H3 55W fog lamp bulb

Gloves or paper towels

Time to complete: 

5 minutes to 20 minutes

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

1) Get under the front bumper and find the fog light casing.  Remove the cap by unscrewing.  Look at how the light was in before you remove.

2) Press the spring that holds the fog light, and firmly release, this should pop up and the bulb should be loose.  Pull the bulb out as far as possible and remove the bulb by just pulling (the bulb should have a wire connected).

3) Put your gloves on and get the new bulb (paper towel will work just as well). DON'T TOUCH THE BULB WITH YOUR SKIN. Connect the wire from the new bulb to the wire in the fog light casing (it will go in, it may just not look like it's in). You may want to test the bulb now to see if it works before you go any further.  

4) Place the bulb back into place.  Check to make sure that it is in straight behind the guard and not pointing to the side.  Pop the spring back over the back of the bulb until the spring has no more tension.  Again check to make sure the light is working and not beaming off to the side.

5) Screw the cover back and enjoy an easy and cheap do it yourself job.

-ClintGT